RLE162

• Operating voltage: AC 24 V
• Frequency: 50/60 Hz
• Power consumption: 2 VA
• Setpoint readjustment range: 0…60 K
• Setpoint setting range: -10…130 °C
• Analog output, signal: DC 0...10 V
• Analog output, current: 1 mA
• Analog input, signal: LG-Ni1000 , 0...1000 Ohm, DC 0...10 V
• Analog outputs, number: 2
• Digital inputs: Potential-free input signal
• Digital input, contact query: 3…6 mA, DC 6…15 V
• Digital outputs, number: 1
• Relay outputs: Normally open contact , Potential-free
• Relay output, switching voltage: AC 24…230 V
• Relay output, switching current: 2 A
• Immersion length: 130 mm
• PN class: PN 10
• Degree of protection: IP65
• Dimensions (W x H x D): 125 x 152 x 78 mm
• Warranty: 24 Months

Compact electronic controller with immersion type temperature sensor and setting unit combined in one device. It is designed for installation directly onto the plant. Only the wires for power supply connection and controller output need to be laid. Threaded nipple (AQE2102) for direct temperature comes with the product RLE162.

Applications:
Modulating temperature controller, with 1 or 2 continuous DC 0…10 V output signals and auxiliary relay. The RLE162 is used for control and limiting of temperature in hot water, heating or cooling plants:

• Domestic hot water temperature
• Heating flow temperature
• Closed circuit heat exchangers
• Water-side control of HVAC units
• Chilled water temperature

Features:

• High or low temperature limitation
• Auxiliary digital output
• Compensation via outside sensor
• Connection for remote setting unit
• P or PI control (selectable)
• Service modes
• Heating and cooling modes available
• Setpoint changeover via external contact or time switch
• Optional legionella function