5WG1512-4AB23 – Bộ TĐ KNX đóng ngắt 1x230VAC, 16 AX, C load Siemens

2,030,000 

* Giá trên website là giá tham khảo, giá hiện tại sẽ có thay đổi. Vui lòng liên hệ Hotline để được báo giá chính xác
* Giá trên chưa bao gồm chi phí lắp đặt và thi công

5.0 (2 đánh giá) Đã bán 15k
Còn hàng
  • SKU: 5WG1512-4AB23
  • Mô tả: KNX Switching actuator 1 x AC 230 V, 16 AX, C load
  • Tình trạng: Hàng có sẵn, mới 100%
  • Chứng từ COCQ, tờ khai hải quan, có xuất hóa đơn VAT
  • Hãng sản xuất: Siemens
  • Giảm thêm 5% khi mua sản phẩm cùng danh mục có giá cao hơn
Thanh Thiên Phú cam kết Thanh Thiên Phú cam kết
banner-cam-ket-dich-vu-khach-hang
Mua ngay

Thông số kỹ thuật 5WG1512-4AB23

Thông số kỹ thuật Giá trị
Mã sản phẩm 5WG1512-4AB23
Loại thiết bị Bộ truyền động đóng ngắt KNX
Số kênh đầu ra 1
Điện áp hoạt động 230 V xoay chiều
Tần số nguồn 50 / 60 Hz
Dòng điện đóng ngắt 16 AX (phù hợp cho tải đèn huỳnh quang)
Loại tải Tải C (khả năng chịu dòng khởi động lớn)
Loại tiếp điểm Tiếp điểm Thường Mở (NO contact)
Kiểu lắp đặt Lắp đặt trên thanh DIN (DIN rail)
Chiều rộng 1 mô-đun (1 MW)
Hệ thống bus KNX
Mô tả sản phẩm
  • One relay contact as switching element
  • Bus-powered electronics
  • Integrated bus coupling unit, Bus connection via bus terminal block
  • Type of protection: IP 20
  • Rated contact voltage AC 230 V
  • Rated contact frequency: 50/60 Hz
  • Rated contact current 16 AX / 20 A
  • Screw-less terminals for connection and through-wiring of untreated single-core, stranded or multi-core conductors, 0.5…2.5 mm2
  • For mounting in AP 118 automation module box or AP 641 room control box

Additional functionalities GAMMA

  • Selectable operating mode (normal mode, time switch mode)
  • Selectable relay mode (NO contact / NC contact)
  • Status object as an optional addition
  • Variable On and Off delay times
  • Selectable logic operation (AND/OR) of two communication objects
  • Selectable switching state at bus voltage failure and recovery
  • Optional addition of a night mode object for time-limited switching On of the output (and hence the illumination) at night
  • Variable On period at night or time switch mode
  • Selectable post-triggering of the On period (On period extension) in time switch mode
  • Selectable warning signal prior to imminent switching-off by means of three-times short off and on switching (flashing) at night or in time switch mode
  • Selectable function:

– Including additional communication object for manual override of an output
– Selectable forced control, including additional communication object for switching an output on or off in forced mode
– Selectable counting of operating hours with threshold monitoring of the operating hours
– Selectable counting of load cycles with threshold monitoring of the load cycles

  • Integrated 8-bit scene control and linking of each output into up to 8 scenes

Additional info
The AP 641 room control box and AP 118 automation module box must be ordered separately.
See chapter Modular Installation System – Room control box – Module boxes.

Thông tin bổ sung
HãngSiemens
Nhiều người tìm kiếm

Đánh giá sản phẩm
2 đánh giá cho 5WG1512-4AB23 – Bộ TĐ KNX đóng ngắt 1x230VAC, 16 AX, C load Siemens
5.0 Đánh giá trung bình
5 100% | 2 đánh giá
4 0% | 0 đánh giá
3 0% | 0 đánh giá
2 0% | 0 đánh giá
1 0% | 0 đánh giá
Đánh giá 5WG1512-4AB23 – Bộ TĐ KNX đóng ngắt 1x230VAC, 16 AX, C load Siemens
Gửi ảnh thực tế
0 ký tự (Tối thiểu 10)
    +

    Lưu ý: để đánh giá được phê duyệt, vui lòng tham khảo Điều khoản sử dụng
    1. Phạm Thanh Duy Đã mua tại thanhthienphu.vn

      Đóng gói cẩn thận, giao hàng nhanh chóng, rất hài lòng!

      thích
    2. Lê Thị Xuân Trang Đã mua tại thanhthienphu.vn

      Sản phẩm này khá tốt, nhưng nếu cải thiện hơn chút thì hoàn hảo!

      thích
    Sản phẩm đã xem

    Bạn chưa xem sản phẩm nào.