5WG1510-2AB23

- Rated voltage: AC 230 V - Rated current: 10 A - Number of channels: 2 - Dimensions (W x H x D): 50.2 x 48.8 x 35.5 mm - Warranty: 24 Months

• 5WG1513-4DB23

• S55204-V105

• S55158-A121

• S55720-S449

• SSA81.1

• ALG153

• 6SL3200-6AM22-6AH0

• S55300-M114

• BPZ-VVG44.25-10

• ASK78.6

• Rated contact frequency: 50/60 Hz
• 2 floating relay contacts
• Contact rated current according to DIN EN 60669-1: 10 A (resistive load)
• Bus-powered electronics
• Integrated bus coupling unit, bus connection via bus terminal
• Type of protection: IP 20
• Rated contact voltage AC 230 V
• Screw-less terminals for connection and through-wiring of untreated single-core, stranded or multi-core conductors, 0.5 … 2.5 mm²
• With bus connection module
• Modular installation device for mounting in AP 118 automation module box or AP 641 room control box

Additional functionalities GAMMA

• For each output:

– Selectable operating mode (normal mode/time switch mode)
– Selectable relay mode (NO contact/NC contact)
– Status object as optional addition
– Variable On and Off delay times
– Selectable logic operation (AND/OR) of two communication objects
– Selectable switching state at bus voltage failure and recovery
– Optional addition of night mode object for time-limited switching On of the output (and hence the illumination) at night

• Variable On period at night or time switch mode
• Selectable post-triggering of the On period (On period extension) in time switch mode
• Selectable warning signal prior to imminent switching-off by means of three-times short off and on switching (flashing) at night or in time switch mode
• Selectable function:

– Including additional communication object for manual override of an output
– Forced control, including additional communication object for switching an output on or off in forced mode
– Counting of operating hours and with threshold monitoring of the operating hours
– Counting of load cycles and with threshold monitoring of the load cycles

• Integrated 8-bit scene control and linking of each output into up to 8 scenes

Additional info
The AP 641 room control box and AP 118 automation module box must be ordered separately.
See chapter Modular Installation System – Room control box – Module boxes.