5WG1525-2AB23

• Output for switching and dimming resistive, inductive or capacitive loads
• Automatic adjustment to leading edge or trailing edge control, depending on the type of load
• Rated frequency 50…60 Hz
• Electronic protection of the output against overload, short circuit and temperature rise
• Bus-powered electronics
• Integrated bus coupling unit, Bus connection via bus terminal block
• Type of protection: IP 20
• Rated operational voltage AC 230 V
• Rated power at +35°C ambient temperature: 10…250 VA
• Screw-less terminals for connection and through-wiring of untreated single-core, stranded or multi-core conductors, 0.5 … 2.5 mm2
• With bus connection module
• Modular installation device for mounting in AP 118 automation module box or AP 641 room control box

Additional functionalities GAMMA

• Selectable mode for each output (normal mode, one- or two-level timer mode, blinking)
• Adjustable on- and off-delay
• Separately adjustable dimming time from 0…100 % for switching on / off and dimming brighter / darker
• Two dimming value objects, each with individually adjustable dimming time from 0…100 %
• The ability to switch an output on or off by dimming brighter/darker
• Adjustable dimming value when switching on
• Immediate activation (jumping) or dimming to a new dimming value
• Selectable additional status object switching and / or status object dimming value for each output
• Additional object for each output for blocking / releasing the output
• Sending of status objects on request and / or automatically after a change
• Adjustable blocking time for sending status objects after restart and bus voltage recovery
• Adjustable dimming value for each output in the event of bus voltage failure and recovery, as well as for mains voltage recovery
• Additional night mode object for time-limited switching on the output (and hence illumination) at night
• Adjustable on period at night or with timer mode
• Selectable warning of imminent switching off the illumination by dimming to 50 % of the previous dimming value during night mode or timer mode
• Integrated 8-bit scene control and integration of each output in up to 8 scenes
• Separately adjustable dimming time for scene control
• Selectable counting of operating hours and with threshold monitoring of the operating hours
• Selectable counting of load cycles and with threshold monitoring of the load cycles

Additional info
The AP 641 room control box and AP 118 automation module box must be ordered separately.
See chapter Modular Installation System – Room control box – Module boxes.

- Rated voltage: AC 230 V - Rated current: 1 A - Number of channels: 1 - Dimensions (W x H x D): 50.2 x 48.8 x 35.5 mm - Warranty: 24 Months

• 5WG1536-1DB31

• S55563-F151

• S55230-V263

• AQB21-2