5WG1528-1CB01 – Bộ điều khiển đèn thông minh KNX, AC120V Siemens

• Two outputs for switching and dimming resistive, inductive or capacitive loads
• Automatic adjustment to leading edge or trailing edge control, depending on the type of load
• Rated operational voltage AC 120 V
• Rated frequency 50 / 60 Hz
• Rated power at +35°C ambient temperature: 150 VA per output or 250 VA for single output usage, without any minimal load per output
• Electronic protection of each output against overload, short circuit and temperature rise
• Screw terminals for connection and through-wiring of untreated single-core, stranded or multi-core conductors, 0.5 … 2.5 mm², AWG 20-13
• Bicolor LED for indicating the switch status (red = on, green = off) or an error (orange, blinking) per output
• Bus-powered electronics
• Integrated bus coupling unit
• Bus connection via bus terminal block
• As a device for DIN-rail mounting on a TH35 mounting rail according to DIN EN 60715

Additional functionalities GAMMA

• Per output with selectable mode (normal mode, one- or two-level timer mode, blinking)
• Adjustable ON- and OFF-delay
• Separately adjustable dimming time from 0% to 100% for switching on / off and dimming brighter / darker
• The ability to switch an output on or off by dimming brighter / darker
• Adjustable dimming value when switching on
• Immediate activation (jumping) or dimming to a new dimming value
• Selectable additional status object switching and / or status object dimming value for each output
• Additional object for each output for blocking / releasing the output
• Sending of status objects on request and / or automatically after a change
• Adjustable blocking time for sending status objects after restart and bus voltage recovery
• Adjustable dimming value for each output in the event of bus voltage failure and recovery
• Additional night mode object for time-limited switching on the output (and hence illumination) at night
• Adjustable ON period at night or with timer mode
• Selectable warning of imminent switching off the illumination by dimming to 50% of the previous dimming value during night mode or timer mode
• Integrated 8-bit scene control and integration of each output in up to 8 scenes
• Separately adjustable dimming time for scene control
• Selectable counting of operating hours and with threshold monitoring of the operating hours
• Selectable counting of load cycles and with threshold monitoring of the load cycles
• Optional disabling of the ripple control compensation in an electrical grid with frequency fluctuations
• Building site function for switching the building site lighting on and off even if the bus devices have not yet been commissioned with ETS

• 5WG1525-2AB23
• S55174-A215
• GSD141-9A
• S55720-S537