5WG1525-2SB32

• One output for switching and dimming resistive, inductive and capacitive loads
• Automatic or manual adjustment to leading edge or trailing edge control, depending on the type of load
• Electronic protection against open-circuit, short circuit and temperature rise
• Rated contact operating voltage: AC 230 V
• Rated contact frequency: 50/60 Hz
• Power rating: 1…200 W LEDs, 20…230 W conventional lamps
• Screw terminals for connection of untreated single-core conductors, stranded without conductor sleeve 0.5 to 4 mm², stranded with conductor sleeve 0.5 to 2.5 mm²
• 3 binary inputs for potential-free contacts, determination of switching status via voltage generated in the device
• Poll voltage of the inputs: approx. 5 V
• Max. 10 m length of connecting cables, preferably J-Y(St)Y, pre-assembled YY6x0.6
• Bus-powered electronics
• Integrated bus coupling unit
• Mounting in appliance boxes according to DIN 49073 or in mounting case M 592/01 (accessories)

Additional functionalities GAMMA

• KNX Data Secure compatible
• Updateable with Siemens Firmware Download Tool
• Dimming output optionally directly operable via input 1 or input 1 and 2
• Adjustable functions of dimming output: status feedback, adjustable brightness limit values, adjustable dimming curves for optimising the dimming behaviour of lamps, adjustable switch-on and dimming behaviour, adjustable switch-on and switch-off delay, staircase function, scene control, logic operations, operating hours counting, disabling function or forced control, central function
• Message in case of short-circuit, overload/mains voltage failure and type of load
• Adjustable preferred behaviour after download, in case of bus voltage failure and recovery
• Adjustable functions of each input: switching, dimming, colour temperature control, solar protection control, sending values, scene control, pair of inputs operation, controller extension (operating mode switchover, presence function, setpoint shift)
• Adjustable debounce time per input
• Adjustable locking of each input via locking object
• 8 logic functions (logic gate, value converter, disabling element, comparator, limit value switch)

- Dimensions (W x H x D): 48 x 50 x 28 mm - Warranty: 24 Months

• 5WG1562-2SB32

• S55812-Y101

• S55561-F247

• QAE2164.010