Giảm giá trực tiếp trên đơn hàng Đầu nối 6ES7392-1AM00-0AA0 loại 40 pin là một phần của hệ thống S7-300, được sử dụng để kết nối các tín hiệu I/O. Sản phẩm được thiết kế với dạng đấu nối Screw Terminal thông minh, dễ dàng tháo lắp nên được người dùng ưu tiên sử dụng.
| General information | |
| Product type designation | Front connector |
| Ambient conditions | |
| Ambient temperature during operation | |
| min. | 0 °C |
| max. | 60 °C |
| Ambient temperature during storage/transportation | |
| min. | -40 °C |
| max. | 70 °C |
| Accessories | |
| belongs to product | S7-300 |
| connection method | |
| Connection I/O signals | |
| Connection method | Screw terminals |
| Number of lines per connection | 1; Or 2 cables up to 0.75 mm² (total) in a shared end sleeve |
| Conductor cross-section in mm² | |
| Connectable cable cross-sections for massive cables, min. |
0.14 mm² |
| Connectable cable cross-sections for massive cables, min. |
0.75 mm² |
| Connectable cable cross-sections for flexible cables without end sleeve, min. |
0.14 mm² |
| Connectable cable cross-sections for flexible cables without end sleeve, max. |
0.75 mm² |
| Connectable cable cross-sections for flexible cables with end sleeve, min. |
0.14 mm² |
| Connectable cable cross-sections for flexible cables with end sleeve, max. |
0.75 mm² |
| Conductor cross-section acc. to AWG | |
| Connectable cable cross-sections for massive cables, min. |
24 |
| Connectable cable cross-sections for massive cables, min. |
19 |
| Connectable cable cross-sections for flexible cables without end sleeve, min. |
24 |
| Connectable cable cross-sections for flexible cables without end sleeve, max. |
19 |
| Connectable cable cross-sections for flexible cables with end sleeve, min. |
24 |
| Connectable cable cross-sections for flexible cables with end sleeve, max. |
19 |
| Wire end processing | |
| Stripped length of cables, min. | 6 mm |
| Stripped length of cables, max. | 6 mm |
| End sleeve acc. to DIN 46228 without plastic sleeve | Design A, 5 mm to 7 mm long |
| End sleeve acc. to DIN 46228 with plastic sleeve | Design E, up to 6 mm long |
| Mounting | |
| Tool | Screwdriver, conical design, 3 mm to 3.5 mm |
| Tightening torque, min. | 0.4 N·m |
| Tightening torque, max. | 0.7 N·m |
| Dimensions | |
| Width | 21.6 mm |
| Height | 125 mm |
| Depth | 40.9 mm |
| Weights | |
| Weight, approx. | 137 g |
Trang chủ