Đầu nối S7-300 20-pin 6ES7392-1AJ00-0AA0 có chức năng kết nối các mô-đun có 20 chân với CPU của PLC S7-300, trung gian truyền tín hiệu giữa các thiết bị này, đồng thời là thiết bị cung cấp nguồn điện cho các mô-đun.
General information | |
Product type designation | Front connector |
Ambient conditions | |
Ambient temperature during operation | |
min. | 0 °C |
max. | 60 °C |
Ambient temperature during storage/transportation | |
min. | -40 °C |
max. | 70 °C |
Accessories | |
belongs to product | S7-300 |
connection method | |
Connection I/O signals | |
Connection method | Screw terminals |
Number of lines per connection | 1; or combination of 2 conductors of up to 1.5 mm² (total) in a shared ferrule |
Conductor cross-section in mm² | |
Connectable cable cross-sections for massive cables, min. |
0.25 mm² |
Connectable cable cross-sections for massive cables, min. |
1.5 mm² |
Connectable cable cross-sections for flexible cables without end sleeve, min. |
0.25 mm² |
Connectable cable cross-sections for flexible cables without end sleeve, max. |
1.5 mm² |
Connectable cable cross-sections for flexible cables with end sleeve, min. |
0.25 mm² |
Connectable cable cross-sections for flexible cables with end sleeve, max. |
1.5 mm² |
Conductor cross-section acc. to AWG | |
Connectable cable cross-sections for massive cables, min. |
24 |
Connectable cable cross-sections for massive cables, min. |
16 |
Connectable cable cross-sections for flexible cables without end sleeve, min. |
24 |
Connectable cable cross-sections for flexible cables without end sleeve, max. |
16 |
Connectable cable cross-sections for flexible cables with end sleeve, min. |
24 |
Connectable cable cross-sections for flexible cables with end sleeve, max. |
16 |
Wire end processing | |
Stripped length of cables, min. | 6 mm |
Stripped length of cables, max. | 6 mm |
End sleeve acc. to DIN 46228 without plastic sleeve | Design A, 5 mm to 7 mm long |
End sleeve acc. to DIN 46228 with plastic sleeve | Design E, up to 6 mm long |
Mounting | |
Tool | Screwdriver, conical design, 3 mm to 3.5 mm |
Tightening torque, min. | 0.4 N·m |
Tightening torque, max. | 0.7 N·m |
Dimensions | |
Width | 23 mm |
Height | 131 mm |
Depth | 36 mm |
Weights | |
Weight, approx. | 70 g |