5WG1545-1DB31 – Bộ điều khiển rèm KNX 4 kênh 24V 6A Siemens

• For control of drives with a DC motor for DC 24 V
• Two relays per output for polarity switching of the output voltage
• Rated contact operating voltage DC 24 V
• Rated contact current: 6 A
• Electronics for detection of the actuation of an electromechanical and electronic limit switches
• Automatic travel time determination via current detection
• Per actuator channel direct operation function on the device for driving solar protection up/down, stop command and slat adjustment
• Two status LEDs per actuator channel to indicate the direction of travel and an override
• Button on the device front for deactivation of the direct mode operation and LED to indicate activation direct mode operation
• Maintenance-free terminals for connection and through-wiring of untreated single-core, stranded or multi-core conductors, 0.5 … 2.5 mm²
• Two terminals per actuator channel for motor connection (up, down)
• Two terminals on the device to connect the DC 24 V (+/-) to supply the load circuits
• Bus-powered electronics
• Housing: plastic, color RAL 7035 (light grey), N-system
• DIN rail mounted device for mounting on rail TH35 according to DIN EN 60715
• Type of protection: IP 20

Additional functionalities GAMMA

• Selectable operation mode blinds, shutter/awning, ventilation flap
• Per actuator channel motion commands for moving and stopping the solar protection or for adjustment of blind slats
• Per actuator channel direct movement to a position of the sunblind and the blind slats
• Per actuator channel central movement of the solar protection in manual mode and automatic mode and delay time for Up / Down
• Distinction between automatic and manual mode (position of the sunblind and blind slats) and adjustable behaviour in sunshine
• Programming and recalling preset positions 1-4 and 8-bit scene control
• Adjustable behaviour in case of override (wind, rain, frost, lock, forced position, forced control, range limitation)
• Adjustable reverse pause time and delay times of the drives
• Per actuator channel configurable state on bus voltage failure and start value on bus voltage recovery
• Adjustable transmission of status objects (direct operation, automatic operation, curtain and slat position, travel, calibration travel time to end positions, overriding) on request, cyclically and/or upon change
• Adjustable transmission time of the status objects after bus voltage recovery and transmission delay between the status objects
• Surveillance of device function

• 5WG1524-4DB23
• S55174-A212
• S55720-S517
• ALT-SS450