Giảm giá trực tiếp trên đơn hàng Đầu nối S7-300 20-pin 6ES7392-1AJ00-0AA0 có chức năng kết nối các mô-đun có 20 chân với CPU của PLC S7-300, trung gian truyền tín hiệu giữa các thiết bị này, đồng thời là thiết bị cung cấp nguồn điện cho các mô-đun.
| General information | |
| Product type designation | Front connector |
| Ambient conditions | |
| Ambient temperature during operation | |
| min. | 0 °C |
| max. | 60 °C |
| Ambient temperature during storage/transportation | |
| min. | -40 °C |
| max. | 70 °C |
| Accessories | |
| belongs to product | S7-300 |
| connection method | |
| Connection I/O signals | |
| Connection method | Screw terminals |
| Number of lines per connection | 1; or combination of 2 conductors of up to 1.5 mm² (total) in a shared ferrule |
| Conductor cross-section in mm² | |
| Connectable cable cross-sections for massive cables, min. |
0.25 mm² |
| Connectable cable cross-sections for massive cables, min. |
1.5 mm² |
| Connectable cable cross-sections for flexible cables without end sleeve, min. |
0.25 mm² |
| Connectable cable cross-sections for flexible cables without end sleeve, max. |
1.5 mm² |
| Connectable cable cross-sections for flexible cables with end sleeve, min. |
0.25 mm² |
| Connectable cable cross-sections for flexible cables with end sleeve, max. |
1.5 mm² |
| Conductor cross-section acc. to AWG | |
| Connectable cable cross-sections for massive cables, min. |
24 |
| Connectable cable cross-sections for massive cables, min. |
16 |
| Connectable cable cross-sections for flexible cables without end sleeve, min. |
24 |
| Connectable cable cross-sections for flexible cables without end sleeve, max. |
16 |
| Connectable cable cross-sections for flexible cables with end sleeve, min. |
24 |
| Connectable cable cross-sections for flexible cables with end sleeve, max. |
16 |
| Wire end processing | |
| Stripped length of cables, min. | 6 mm |
| Stripped length of cables, max. | 6 mm |
| End sleeve acc. to DIN 46228 without plastic sleeve | Design A, 5 mm to 7 mm long |
| End sleeve acc. to DIN 46228 with plastic sleeve | Design E, up to 6 mm long |
| Mounting | |
| Tool | Screwdriver, conical design, 3 mm to 3.5 mm |
| Tightening torque, min. | 0.4 N·m |
| Tightening torque, max. | 0.7 N·m |
| Dimensions | |
| Width | 23 mm |
| Height | 131 mm |
| Depth | 36 mm |
| Weights | |
| Weight, approx. | 70 g |
Trang chủ